Same-day shipping for orders placed before 2:30PM MST | 📞 (480) 977 3555 | ⛟ Free ground shipping available for orders over $250
Same-day shipping for orders placed before 2:30PM MST
Free ground shipping available for orders over $250
📞 TALK TO A SALES REPRESENTATIVE NOW

D7044 - Bosch

MULTIPLEX SINGLE-INPUT MODULE
Availability: In stock
SKU
D7044
MULTIPLEX SINGLEINPUT MODULE


The D7044 Multiplex Single+input Module connects a normally+open (NO) contact to the multiplex bus of a D7024, DS9400M, or FPD+7024 Addressable Fire Alarm Control Panel (FACP). Use the D7044 supervised input in a Class B configuration. All operating power for the input module is drawn from the FACP.

Rotary switches allow convenient address setting. An on+board status LED on the module indicates normal, alarm, and trouble conditions and is visible on the module or on an attractive, low+profile faceplate.

  • Use with D7024, DS9400M, or FPD+7024 Addressable FACPs

  • Fits into a standard double+gang or four+inch square back box

  • Easy addressing using rotary switches

  • Low current draw u UL Listed


Wiring

Make connections to the terminals on the rear of the D7044. All terminals can accommodate up to 12 AWG (2.3 mm) wire; however, follow wiring guidelines specified by the National Electrical Code (NFPA-70). All wiring is power limited and supervised.

Multiplex Single+input Module

The D7044 connects a normally+open (NO) contact to the multiplex bus of a D7024, DS9400M, or FPD+7024 FACP. (more...)
Write Your Own Review
You're reviewing:D7044 - Bosch
Your Rating