HPFF12E - Honeywell
h212 AMP 24 VOLT F/A POWER SUPPLY, 220/240 VAC, INCLUDES RED ENCLOSURE, BATTERY CABLE, AND INSTALLATION INSTRUCTIONS/h2
Availability:
In stock
Only 6 left
SKU
HPFF12E
h212 AMP 24 VOLT F/A POWER SUPPLY, 220/240 VAC, INCLUDES RED ENCLOSURE, BATTERY CABLE, AND INSTALLATION INSTRUCTIONS/h2
12 AMP 24 VOLT F/A POWER SUPPLY, 220/240 VAC, INCLUDES RED ENCLOSURE, BATTERY CABLE, AND INSTALLATION INSTRUCTIONS
The Honeywell HPFF12(E) and HPFF12CM(E) are Notification Appliance Circuit (NAC) Expander Power Supplies designed to extend the power capabilities of existing NACs and provide power for auxiliary devices.
The HPFF12 and HPFF12CM connect to any 12 or 24V Fire Alarm Control Panel (FACP) or operates stand-alone. They provide regulated and filtered 24VDC power to four NAC's and an auxiliary output.
The NAC outputs are rated at 3.0 amps each and the auxiliary output is rated at 2.0 amps (this output is continuously supplied, even an alarm, and therefore must be taken into account for power supply loading and battery size calculations).
The combined output cannot exceed 12.0 amps. The HPFF12 and HPFF12CM provide independent output circuit supervision so in the event of a NAC fault they can notify the attached FACP. In addition they have a trouble memory feature that displays past troubles (by NAC) for rapid diagnostics. Synchronization is built-in in five appliance brands.
Datasheet HPFF12E.
12 AMP 24 VOLT F/A POWER SUPPLY, 220/240 VAC, INCLUDES RED ENCLOSURE, BATTERY CABLE, AND INSTALLATION INSTRUCTIONS
The Honeywell HPFF12(E) and HPFF12CM(E) are Notification Appliance Circuit (NAC) Expander Power Supplies designed to extend the power capabilities of existing NACs and provide power for auxiliary devices.
The HPFF12 and HPFF12CM connect to any 12 or 24V Fire Alarm Control Panel (FACP) or operates stand-alone. They provide regulated and filtered 24VDC power to four NAC's and an auxiliary output.
The NAC outputs are rated at 3.0 amps each and the auxiliary output is rated at 2.0 amps (this output is continuously supplied, even an alarm, and therefore must be taken into account for power supply loading and battery size calculations).
The combined output cannot exceed 12.0 amps. The HPFF12 and HPFF12CM provide independent output circuit supervision so in the event of a NAC fault they can notify the attached FACP. In addition they have a trouble memory feature that displays past troubles (by NAC) for rapid diagnostics. Synchronization is built-in in five appliance brands.
Datasheet HPFF12E.
Write Your Own Review
